5 Layer Co-Extrusion Blown Film Machine

CT-FL5
5 Layer Co-Extrusion Blown Film Machine
Features
  • Suitable material: HDPE / MDPE / LD/LLDPE / PP / PA / Metallocene / EVA
  • Film layer: 5 layers
  • Screw L/D ratio: 30:1
  • Direct-connection design gearbox
  • PID+SCR temperature controller.
  • ABB or HITACHI inverter.
  • Oscillating rotary device (haul-off unit).
  • I.B.C. Inter-bubble cooling system.
  • Air cooler for air ring & I.B.C.
  • E.P.C. Edge position film guiding system.
  • Back to back automatic winders + Trim waste rewinder.
  • Air shaft x 4 pcs.
Items/Models FL5/32223/500 FL5/32223/650 FL5/33433/1100 FL5/34443/1500 FL5/43334/1100 FL5/44544/1500
Screw Diameter (mm) 25x3 + 35x2 25x3 + 35x2 35x4 + 45 35x2 + 45x3 35x3 + 45x2 45x4 + 55
Film Width (mm) 300-400 450-550 600-1000 800-1350 750-1000 800-1350
Output (kg/hr) 30-60 35-70 60 – 120 100- 160 60 – 120 100- 200
Film Thickness (mm) 0.03-0.12, depending on the material & film size
Main Motor (HP) 5x3 + 10x2 5x3 + 10x2 10 x 4 + 20 10x2 + 20x3 10 + 20x4 20x4 + 30
Items/Models FL5/54445/1500 FL5/55655/2000 FL5/56665/2500 FL5/65556/2000 FL5/66866/2500 FL5/68886/2500 FL5/88188/3000
Screw Diameter (mm) 45x3 + 55x2 55x4 + 65 55x2 + 65x3 55x3 + 65x2 65x4 + 80 65x2 + 80x3 80x4 + 100
Film Width (mm) 1100-1350 1200-1800 1500-2300 1400-1800 1500-2300 1500-2300 2000-2800
Output (kg/hr) 90-180 170-340 300-420 120 - 220 350-550 400-600 500-750
Film Thickness (mm) 0.03-0.12, depending on the material & film size
Main Motor (HP) 20x3 + 30x2 30x4 + 50 30x2 + 50x3 30x3 + 50x2 50x4 + 75 50x2 + 75x3 75x4 + 100
Back